• Thanks for stopping by. Logging in to a registered account will remove all generic ads. Please reach out with any questions or concerns.

RCN Carrier models

Some minor corrections made to the design after the print finished (I should have done it as a draft instead of fine/detailed...oh well.)

Time to go fit it into the ship and see what other changes have to be made!
 
Where'd you get that deck schematic? I have an extremely nerdy fondness for warship deck layouts...
 
4 layers of fiberglass resin and 1 layer of cloth later, and I now have the skegs almost done.
 

Attachments

  • 379996395_10158981784157242_6096692870039034073_n.jpg
    379996395_10158981784157242_6096692870039034073_n.jpg
    265.5 KB · Views: 8
  • 379999604_10158981215427242_3892916534128653059_n.jpg
    379999604_10158981215427242_3892916534128653059_n.jpg
    316.6 KB · Views: 8
  • 379992195_10158981215272242_7015251814674858279_n.jpg
    379992195_10158981215272242_7015251814674858279_n.jpg
    309.1 KB · Views: 7
  • 379187981_10158981214702242_6998787856135576330_n.jpg
    379187981_10158981214702242_6998787856135576330_n.jpg
    319.6 KB · Views: 7
And here's the after workshop section as printed and fit to the ship. Still some work to do - I need a fresh jar of white paint to do some bulkheads, but this gives the general idea. I'm quite pleased with how it turned out!
 

Attachments

  • 375729206_10158958692037242_9064806566631387718_n.jpg
    375729206_10158958692037242_9064806566631387718_n.jpg
    348.2 KB · Views: 23
  • 375794011_10158958692852242_1373337085414329690_n.jpg
    375794011_10158958692852242_1373337085414329690_n.jpg
    326.5 KB · Views: 23
  • 376700102_10158964106732242_1599192728589227290_n.jpg
    376700102_10158964106732242_1599192728589227290_n.jpg
    320.9 KB · Views: 23
OK, so, I thought I was done the fiberglass work...turns out that was a pipe dream. While the hull looks really really good after priming it, there are also a few flaws that showed up...so, more sanding, more resin...we'll see how this goes.
 

Attachments

  • 380886863_1040698377289716_7671078609708937263_n.jpg
    380886863_1040698377289716_7671078609708937263_n.jpg
    258.1 KB · Views: 8
  • 383283972_1365084627722616_8785622357748213394_n.jpg
    383283972_1365084627722616_8785622357748213394_n.jpg
    142.6 KB · Views: 10
  • 383699766_328800716279352_1447999553453266017_n.jpg
    383699766_328800716279352_1447999553453266017_n.jpg
    108.5 KB · Views: 7
  • 383205101_684685313561786_191786069445725899_n.jpg
    383205101_684685313561786_191786069445725899_n.jpg
    177.2 KB · Views: 7
  • 381125241_1520939308662782_455226980157063306_n.jpg
    381125241_1520939308662782_455226980157063306_n.jpg
    200.5 KB · Views: 8
  • 383253472_1015316399618846_533732009780878066_n.jpg
    383253472_1015316399618846_533732009780878066_n.jpg
    109.5 KB · Views: 9
  • 383478344_708641407268028_9029653717435622239_n.jpg
    383478344_708641407268028_9029653717435622239_n.jpg
    152.1 KB · Views: 10
OK, so 11 layers of fiberglass and resin later, and I think I'm almost done. Some of the blemishes that were in this hull as received are...terrible. If you look at the above photo with the red splotches, you'll get an idea of all the low spots that needed filling.

It's a process....and that layer of primer did me no favours in the end!
 
Last October, I came across this image that a builder over in the UK showed off from his HMS Hermes build.

It inspired me....and as of this week, I think I'm almost there.
 

Attachments

  • Hermesl Hangar Deck.jpg
    Hermesl Hangar Deck.jpg
    190.6 KB · Views: 15
Here's the removable center panel of the flight deck - the intent is to have a copy of this made in clear plastic so that when on display, people will be able to see into the hangar area.

I'm quite pleased with how this is turning out. Things are lining up such that with the island in place, the entire hangar deck is still able to be lifted up and out to access the space below where batteries and RC gear will be hidden.
 

Attachments

  • 391604390_10159024024367242_552184802730804657_n.jpg
    391604390_10159024024367242_552184802730804657_n.jpg
    352.7 KB · Views: 21
  • 391685673_10159024024492242_1844200859360912248_n.jpg
    391685673_10159024024492242_1844200859360912248_n.jpg
    408 KB · Views: 21
So, the Bonnie has been on the side burner for a bit - other project that have to be done by spring took priority in the near term.

That said, today, I had a retired sailor who sailed on Bonnie drop over to have a look at her. He told some great stories, and really enjoyed looking at the model. Turns out he was an Electrician who slept in Mess 5D(2) - so I did a bit of 3D modeling...

1703381934497.png
 
OK...so...rabbit hole time.

I tried printing a sample, and I've had to break the bunk-beds out as separate printable items.

I also decided that building zone 5D2 wasn't good enough...so I did 5D1 as well, then decided to go up a level...so I now have zones 4D and 5D being printed.

In zone 4D (on the left) you can see the compartment in the center for the 2x Diesel Generators (300Kw)

Interestingly, these ships are designed without many fore/aft entry points between the main zone bulkheads. There is one water-tight Hatch leading aft in zone 4D2. Every other space is accessed from above.

Almost like there was a real concern about watertight integrity against potential battle damage.

So...how far down this rabbit hole will I end up going? Good question. If I do zone 3D, then I get into some more workshop spaces, then zone 2D moves up to the cable deck level and the ship's canteen.

Going down to zone 6D gets me into the SONAR (ASDIC) suite, which for me, as a SONAR tech is VERY interesting!!!
 

Attachments

  • 4 and 5 Deck Zone D.jpg
    4 and 5 Deck Zone D.jpg
    65.7 KB · Views: 9
Here's the test prints. The one with the black pieces - bunks and diesel engines - that's the 4 deck section. You can see that there's some gaps in the 5 deck section that have to get sorted out and re-printed.
 

Attachments

  • 415231394_10159135613797242_7030141339473790546_n.jpg
    415231394_10159135613797242_7030141339473790546_n.jpg
    333.7 KB · Views: 9
  • 415281035_10159135613842242_1580402037578876993_n.jpg
    415281035_10159135613842242_1580402037578876993_n.jpg
    212.4 KB · Views: 9
Here's the floor plan....I will note that the ship had 4x 500KW Turbo Generators that would normally have supplied power to the ship when she was under steam. I think these were emergency Diesels, or used when alongside and no shore power was available.

I note that in zone 4N there were another pair of 300KW DG's. This pair was just forward of the aft elevator.
 

Attachments

  • 4 Deck Section D.JPG
    4 Deck Section D.JPG
    269 KB · Views: 7
Last edited:
Back
Top