Search results

Down East Inc in Maine manufactured the original pack frames for the US Molle II System.  The first frames absolutely sucked in the eyes of endusers.  The plastic was brittle and broke easily, causing many a trooper to suck it up and drive on with a broken ruck on his back.  The design was...

About the only aftermarket Arid Regions CadPat Smocks I've seen available are the Dropzone Tactical Recce Smocks but they are pricey at $449; http://www.dropzonetactical.com/clothing/reccesmock.html There are more aftermarket Temperate Woodlands CadPat smocks out there but the cloth is...

Anybody know scope 3RCR employs on theirs?  A Leupold Mk4 3.5-10x  M2 in Flat Dark Earth? Add a Larue SPR Mount, some Black Hills 168gr Match, and any terrorist acting out in an antisocial manner within 1100meters is toast......Or 1300m for you guys.... (Edited by Moderator to remove...

Frack!  You guys can't even kit up to practice on your own dime.....God forbid you'd want to be the best Rifleman (or Woman) you can, for the Crown.

7.62SASS in Iowa, US of A: http://www.762sass.com/product.php?p=493&cid=9&session=adf2dd93250e349cc30bd943477af436 Just in off the truck. We have a limited amount of Canadian  :cdn: contract ArmaLite Super Sass rifles exclusively found at 762SASS. This is a Canadian military sniper  :yellow...

I found a place offering Armalite AR-10 SASS Canadian  :cdn:  Contract Overruns, without scope or mount: What would the proper scope and mount be? Opinions/Stories/Jibes  not violating OPSEC?

So Canadian Forces are going to a USMC gear format, one set of coyote brown kit for wear with TW or AR CadPat? I find it amazing DND would contract with a firm halfway around the world instead of finding a Canada-based firm to produce your kit. I just hope the co in Australia doesn't sub it...

Subdued on eBay: http://cgi.ebay.com/CANADIAN-ARMED-FORCES-ODD-CAREER-CORPORAL-RANK-CHEVRON_W0QQitemZ310209310195QQcmdZViewItemQQptZLH_DefaultDomain_2?hash=item4839ea6df3 Dress...

Hello,   I want to sew up a couple replica Blast Blankets as used in CF Vehicles during deployments with IFOR and ISAF, for my Iltis.   Judging from this photo, they appear to be approximately 3'x5' or 4'x6'.  http://i67.photobucket.com/albums/h315/adlerarmory/3RCR2.jpg I figure I can stitch...

I have an Enlistedman PPCLI Crest which  has SGT BILKO TRADING in raised letters on the back.  I know he is a surplus dealer, guess he has diversified. 

Vermont Army Navy has the 50/50 NyCo Uniform Cloth $4.95/yd  and a 70denier Taslan Nylon $3.95/yd: http://www.vtarmynavy.com/camo_material_and_fabrics.htm Magna Fabrics in New Jersey has the 50/50 NyCo Uniform Cloth and 70denier Jr Supplex and Taslan Pure Finish, but is mostly a wholesale...

Voodoo and Condor are substandard, made for the airsoft market.  While Condor may use genuine Crye Precision 1000d Multicam cloth, for example, the stitches per inch and the thread itself is not to mil spec.  Pay once, cry once.  Do you want to be 6 km down the road in a night march, to find...

Ralph at Niagara Jeep Parts has 4 or 5 M101CDN2s left, $800-1000, all of them titled.

Excuse the Thread-Jack:  Hero Army Surplus has a few of the CAR-badged DPM Jumpsmocks in Size 3,  $70, I think

The original owners were kinda sketchy on the accessories.  I was pleasantly surprised to find out mine came with the radiator plate, 2 safety chains, chock block, door pouch and two rifle mounts outboard of the front seats. I also located an unstucker kit at Niagara Jeep Parts. Now to find...

Research has revealed that my '84 Iltis, CFR# 36109, came out of Petawawa. Its probably a stretch to ever find out to which unit it actually belonged. So I will settle for help with recreating the proper unit markings for a C&R Iltis in 3RCR, first Afghan deployment. I did locate an M240...

I'm in search of the radiator protector plate for winter ops, extra wheels, and the Iltis Unstucker Kit, the two capstan drums that attach to the rear wheels for self-recovery ops.  Also the basic tool kit issued with the Iltis. Edit: I found an M101CDN2 in Idaho, so life is good.

Worse case scenario, using Mk 1 Mod 3 Eyeball, looks like about 10cm long, front section 23mm dia  x 35mm tapered to middle 25mm dia x 30mm, rear 22mm x 35mm.  I didn't know the bbl was heavy under the handguards like the M4A1 SOCOM Barrel.  Now I need to decide to try to find a HBAR bbl or go...

For part of my Iltis display, I'd like to put a C7A1 and a C8SFW in the rifle mounts.  I found a 16" Carbine barrel with the area under the handguard turned down but without an M203 notch on the front, a perfect candidate for conversion to a C8SFW barrel.    I can pull the front sight tower...

I've been searching for an Elcan for a C7A1 Rifle I'm building.  I found one of the black Elcans with the rifle recticle locally.  This scope doesn't have any illumination.  I was told some Elcans were imported without the Tritium due to lack of NRC permits. Looking it over, I could not find a...